MK2308-1H
|
|
|
Top Searches for this datasheet
MK2308G-1H - MK2308G-1H
MK2308-1H - MK2308-1H
MK2308-1H
VOLT ZERO DELAY, SKEW BUFFER
MK2308-1H phase noise, high-speed based, 8-output, skew zero delay buffer. Based ICS' proprietary jitter Phase Locked Loop (PLL) techniques, device provides eight skew outputs speeds outputs generated from (for zero delay), directly from input (for testing), tri-state mode stop level. normal operation zero delay buffer, output clock tied FBIN pin. manufactures large variety clock generators buffers.
Features
Clock outputs from Zero input-output delay Eight skew (<200 outputs Device-to-device skew <700 Full CMOS outputs with output drive capability levels tolerant FBIN CLKIN pins Tri-state mode board-level testing Advanced, low-power, sub-micron CMOS process Operating voltage Industrial temperature range available Packaged 16-pin SOIC TSSOP packages Available (lead) free package Industrial commercial temp operation
Block Diagram
Control Logic
CLKA1 CLKA2
CLKIN
CLKA3 CLKA4
FBIN
Clock Synthesis
CLKB1 CLKB2 CLKB3 CLKB4
Feedback shown from CLKB4 illustration, come from output.
2308-1H
Race Stre 5126
Revision 020905 97-12
MK2308-1H VOLT ZERO DELAY, SKEW BUFFER
Assignment
CLKIN CLKA1 CLKA2 CLKB1 CLKB2 FBIN CLKA4 CLKA3 CLKB4 CLKB3
16-pin narrow (150 mil) SOIC (173 mil) TSSOP
Output Clock Mode Select Table
CLKA1:A4 Tri-state (note Running Running Running CLKB1:B4 Tri-state (note Tri-state (note Running Running Source CLKIN (note Status
Note Outputs high impedance state Note Buffer mode only; zero delay between input output
Descriptions
Number Name CLKIN CLKA1:A4 CLKB1:B4 CLKB1:B4 CLKA1:A4 FBIN Type Input Output Power Power Output Input Input Output Power Power Output Input Clock input tolerant). Clock outputs A1:A4. table above. Power supply. Connect Connect ground. Clock outputs B1:B4. table above. Select input table above. Internal pull-up. Select input table above. Internal pull-up. Clock outputs B1:B4. table above. Connect ground. Power supply. Connect Clock outputs A1:A4. table above. Feedback input. Connect output under normal operation tolerant).
2308-1H grated Circuit Systems
Street, Jose, 9512
Revision 020905 297-1
MK2308-1H VOLT ZERO DELAY, SKEW BUFFER
External Components
MK2308-1H requires minimum number external components proper operation. Decoupling capacitors 0.01 should connected between pins pins close device possible. series termination resistor used each clock output reduce reflections.
Absolute Maximum Ratings
Stresses above ratings listed below cause permanent damage MK2308-1H. These ratings, which standard values commercially rated parts, stress ratings only. Functional operation device these other conditions above those indicated operational sections specifications implied. Exposure absolute maximum rating conditions extended periods affect product reliability. Electrical parameters guaranteed only over recommended operating temperature range.
Item
Supply Voltage, Inputs Outputs CLKIN FBIN inputs Electrostatic Discharge Ambient Operating Temperature Industrial Temperature Storage Temperature Junction Temperature Soldering Temperature
Rating
-0.5 VDD+0.5 -0.5 2000 +70°C +85°C +150°C 150°C 260°C
Recommended Operation Conditions
Parameter
Ambient Operating Temperature Power Supply Voltage (measured respect GND)
Min.
+3.0
Typ.
Max.
+3.6
Units
Electrical Characteristics
VDD=3.3 ±10%, Ambient temperature +85°C (Industrial), 70°C (Commercial)
Parameter
Operating Voltage Input High Voltage Input Voltage Input Current Input High Current Output High Voltage Output Voltage
Symbol
Conditions
Min.
Typ.
Max.
Units
2308-1H grated Circuit Systems
Street, Jose, 9512
Revision 020905 297-1
MK2308-1H VOLT ZERO DELAY, SKEW BUFFER
Parameter
Output High Voltage, CMOS level Operating Supply Current Power Down Supply Current Short Circuit Current Input Capacitance
Symbol
IDDPD
Conditions
Load, Note CLKIN CLKIN Note Each output FBIN
Min.
VDD-0.4
Typ.
Max.
Units
Electrical Characteristics
±10%, Ambient Temperature +85°C (Industrial), 70°C (Commercial)
Parameter
Input Clock Frequency Output Clock Frequency Output Rise Time Output Fall Time Output Clock Duty Cycle Device Device Skew Output Output Skew Input Output Skew Maximum Absolute JItter Cycle Cycle Jitter
Symbol
Conditions
table page table page 2.0V, CL=30pF 0.8V, CL=30pF measured VDD/2 rising edges VDD/2 rising edges VDD/2 rising edges VDD/2, FBIN CLKA4, Note CL=15 measured 66.67M CL=30 measured 66.67M CL=15 measured 66.67M CL=15 measured 133.33M
Min.
Typ.
Max. Units
1.25
±250
Lock Time
Note
Note With CLKIN MHz, FBIN CLKA4, outputs Note When there clock signal present CLKIN, MK2308-1H will enter power down mode. stopped outputs tri-state. Note With steady rate valid clocks CLKIN FBIN
Thermal Characteristics 16TSSOP
Parameter
Thermal Resistance Junction Ambient
Symbol
Conditions
Still flow flow
Min.
Typ.
Max. Units
°C/W °C/W °C/W °C/W
Thermal Resistance Junction Case
2308-1H grated Circuit Systems
Street, Jose, 9512
Revision 020905 297-1
MK2308-1H VOLT ZERO DELAY, SKEW BUFFER
Thermal Characteristics 16SOIC
Parameter
Thermal Resistance Junction Ambient
Symbol
Conditions
Still flow flow
Min.
Typ.
Max. Units
°C/W °C/W °C/W °C/W
Thermal Resistance Junction Case
Package Outline Package Dimensions (16-pin SOIC, Mil. Narrow Body)
Package dimensions kept current with JEDEC Publication
Millimeters Symbol Inches
INDEX AREA
1.35 1.75 0.10 0.25 0.33 0.51 0.19 0.25 9.80 10.00 3.80 4.00 1.27 BASIC 5.80 6.20 0.25 0.50 0.40 1.27
.0532 .0688 .0040 .0098 .013 .020 .0075 .0098 .3859 .3937 .1497 .1574 0.050 BASIC .2284 .2440 .010 .020 .016 .050
SEATING PLANE
(.004)
2308-1H grated Circuit Systems
Street, Jose, 9512
Revision 020905 297-1
MK2308-1H VOLT ZERO DELAY, SKEW BUFFER
Package Outline Package Dimensions (16-pin TSSOP, 4.40 Body, 0.65 Pitch)
Package dimensions kept current with JEDEC Publication
Millimeters Symbol
Inches
-1.20 0.05 0.15 0.80 1.05 0.19 0.30 0.09 0.20 4.90 6.40 BASIC 4.30 4.50 0.65 Basic 0.45 0.75 -0.10
-0.047 0.002 0.006 0.032 0.041 0.007 0.012 0.0035 0.008 0.193 0.201 0.252 BASIC 0.169 0.177 0.0256 Basic 0.018 0.030 -0.004
2308-1H grat Circuit Syst
reet Jose, 9512
Revision 020905 297-1
MK2308-1H VOLT ZERO DELAY, SKEW BUFFER
Ordering Information
Part Order Number
MK2308S-1H MK2308S-1HT MK2308S-1HLF MK2308S-1HLFT MK2308S-1HI MK2308S-1HIT MK2308G-1HI MK2308G-1HIT MK2308G-1HILF MK2308G-1HILFT MK2308G-1H MK2308G-1HT MK2308G-1HLF MK2308G-1HLFT
Marking
MK2308S-1H MK2308S-1H MK2308S-1HLF MK2308S-1HLF MK2308S-1HI MK2308S-1HI 2308-1HI 2308-1HI 23081HIL 23081HIL 2308G-1H 2308G-1H 2308-1HL 2308-1HL
Shipping Packaging
Tubes Tape Reel Tubes Tape Reel Tubes Tape Reel Tubes Tape Reel Tubes Tape Reel Tubes Tape Reel Tubes Tape Reel
Package
16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP
Temperature
+70° +70° +70° +70° +85° +85° +85° +85° +85° +85° +70° +70° +70° +70°
While information presented herein been checked both accuracy reliability, Integrated Circuit Systems (ICS) assumes responsibility either infringement patents other rights third parties, which would result from use. other circuits, patents, licenses implied. This product intended normal commercial applications. other applications such those requiring extended temperature range, high reliability, other extraordinary environmental requirements recommended without additional processing ICS. reserves right change circuitry specifications without notice. does authorize warrant product life support devices critical medical instruments.
2308-1H grat Circuit Syst
reet Jose, 9512
Revision 020905 297-1
Other recent searches
TPS61100 - TPS61100 TPS61100 Datasheet
TPS61103 - TPS61103 TPS61103 Datasheet
TPS61106 - TPS61106 TPS61106 Datasheet
TPS61107 - TPS61107 TPS61107 Datasheet
MPSA55 - MPSA55 MPSA55 Datasheet
MK05-1A66C-500W - MK05-1A66C-500W MK05-1A66C-500W Datasheet
MK05-1A71C-500W - MK05-1A71C-500W MK05-1A71C-500W Datasheet
LL-41 - LL-41 LL-41 Datasheet
CY7C68001 - CY7C68001 CY7C68001 Datasheet
SX2TM - SX2TM SX2TM Datasheet
Privacy Policy | Disclaimer
© 2013 Datasheets.org.uk