LPS120
|
|
|
Top Searches for this datasheet
LPS120 - LPS120
LPS120 Series
Watts
Total Power: Input Voltage: Outputs: Watts Single
Rev. 5.09.06 LPS120 Series
RoHS
Electrical Specifications
Special Features
Active power factor correction footprint Less than high EN61000-3-2 compliant Remote sense Power fail remote inhibit Single wire current sharing Adjustable main output Built-in Class filter Overvoltage protection Overload protection Thermal overload protection Standby output output
Input
Input range Frequency Inrush current Efficiency EMI/RFI Power factor Safety ground leakage current 300VDC 47-440 max., cold start 25°C typical full load Class conducted; CISPR22 Class conducted; EN55022 Class conducted; VDE0878PT3 Class conducted 0.99 typical 0.5mA 50/60 input
Output
convection 130W with 30CFM forced minimum main outputs 500mA 500mA 20ms 125W load, 120VAC input Short circuit protection outputs. Case overload protected 120-135% above rating Overvoltage protection 20-35% above nominal output Remote sense Compensates lead drop max. Will operate without remote sense connected. Reverse connection protected. Logical Control Power failure logic signal goes high 100-500 msec after main output; goes least msec before loss regulation Requires contact closure disable outputs, except standby. Compensates lead drop min. Will operate without remote sense connected. Reverse connection protected. Maximum power Adjustment range output Standby outputs Hold-up time Overload protection
Safety
NEMKO AUSTEL 60950 60950 60950 60950 60950 Certificate report Mark (LVD)
Remote inhibit Remote sense
Rev. 5.09.06 LPS120 Series
Environmental Specifications
Operating temperature: 50°C ambient derate each output 2.5% degree from 70°C. -20°C start
Mechanical Drawing
3.00 (76.2) 2.55 (64.8)
Storage temperature: Electromagnetic susceptibility: Humidity: Vibration: MTBF demonstrated
-40°C +85°C designed meetEN61000-4; Level Operating; non-condensing IEC68-2-6 levels IEC721-3-2 >550,000 hours full load 25°C ambient conditions
0.15" DIA. places (4.0)
LIVE
NEUTRAL
EARTH
4.55 (115.6)
5.00 (127.0)
Adjust
M3.5 places)
1.29 (32.8)
0.20"
Ordering Information
Model Number LPS121 LPS122 LPS123 LPS124 LPS125 LPS128 Output Voltage 3.3V Minimum Load Maximum Load with Convection Cooling 6.7A 5.3A 3.4A 1.7A Maximum Load with 300CFM Peak Load Regulation2 Forced 10.8A 8.7A 5.4A 2.7A 12.8A 10.0A 6.3A 3.2A Ripple (PARD)3 50mV 50mV 120mV 150mV 240mV 480mV
Astec Power
Rev. 5.09.06 LPS120 Series
5810 Allen Carlsbad, 92008 Telephone: 4600 Facsimile: 0698 Technical Support: ASTEC 2752 Waterfront Business Park Merry Hill, Dudley West Midlands, United Kingdom Telephone: 1384 Facsimile: 1384 Units 2111-2116, Level Tower Metroplaza 223, Hing Fong Road Kwai Fong, Territories Hong Kong Telephone: +852 2437 9662 Facsimile: +852 2402 4426
Peak current lasting seconds with maximum duty cycle. 25°C including initial tolerance, line voltage, load currents output voltages adjusted factory settings. Peak-to-peak with bandwidth (tantalum capacitor) parallel with capacitor rated line voltage load ranges.
Assignments
Connector LPS120 Pin1 Pin3 TB-1 TB-2 Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10 Neutral Line COMMON Main output Remote sense Remote sense +Remote inhibit -Remote inhibit +Power fail Common +12V common standby Molex 09-50-8031 (connector) 08-52-0113 (pins) Molex series 19141-0058/0063 Spade Molex 90142-0010 (USA) PINS: 90119-2110 Amp: 87977-3 PINS: 87309-8 Astec Connector 70-841-020, includes above.
global contact, visit:
www.astecpower.com technicalsupport@astec.com
While every precaution been taken ensure accuracy completeness this literature, Astec Power assumes responsibility, disclaims liability damages resulting from this information errors omissions. Printed
Mating Connectors (SK1)AC Input: (SK2)DC Output: (SK3) Control Signals:
Emerson Network Power. global leader enabling business-critical continuity. Power Connectivity Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring Services EmersonNetworkPower.
Emerson Network Power Emerson Network Power logo trademarks service marks Emerson Electric ©2006 Emerson Electric
Notes: Specifications subject change without notice. dimensions inches (mm), tolerance ±.02". mounting holes MH1, MH2, should grounded purpose Mounting safety ground connection Specifications convection rating factory settings input unless otherwise stated. This power supply requires mounting metal standoffs 0.20" (5m) height. Warranty: year Weight: 0.71 0.32
Other recent searches
WP934CB - WP934CB WP934CB Datasheet
MX251 - MX251 MX251 Datasheet
MX255 - MX255 MX255 Datasheet
KIA6924S - KIA6924S KIA6924S Datasheet
IPD75N04S4-06 - IPD75N04S4-06 IPD75N04S4-06 Datasheet
BUL6803 - BUL6803 BUL6803 Datasheet
AP7S - AP7S AP7S Datasheet
ACTR303 - ACTR303 ACTR303 Datasheet
Privacy Policy | Disclaimer
© 2013 Datasheets.org.uk