HMC532LP4
|
|
|
Top Searches for this datasheet
vco mmic - vco mmic
HMC532LP4 - HMC532LP4
HMC532LP4 532LP4E
v01.0508
MMIC BUFFER AMPLIFIER,
noise MMIC w/Buffer Amplifier for: VSAT Radio Point Point/Multipoint Radio Test Equipment Industrial Controls Military End-Use
Features
Pout: Phase Noise: -103 dBc/Hz @100 External Resonator Needed Single Supply: Leadless Package,
Functional Diagram
General Description
HMC532LP4 HMC532LP4E GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC VCOs with integrated resonators, negative resistance devices, varactor diodes, buffer amplifiers. Covering GHz, VCO's phase noise performance excellent over temperature, shock vibration oscillator's monolithic structure. Power output typical from single supply +3.0V voltage controlled oscillator packaged leadless surface mount package.
VCOS PLOs
Electrical Specifi cations, +25°
Parameter Frequency Range Power Output Phase Noise Offset, Vtune= Output Tune Voltage (Vtune) Supply Current (Icc) (Vcc +3.0V) Tune Port Leakage Current Output Return Loss Harmonics Pulling (into 2.0:1 VSWR) Pushing Vtune= Frequency Drift Rate 0.85 Min. Typ. -101 Max. Units dBc/Hz MHz/V MHz/°C
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC532LP4 532LP4E
v01.0508
MMIC BUFFER AMPLIFIER,
Frequency Tuning Voltage, 25°C
FREQUENCY (GHz) TUNING VOLTAGE (VOLTS)
2.85V 3.00V 3.15V
Frequency Tuning Voltage, Vcc=
FREQUENCY (GHz) TUNING VOLTAGE (VOLTS)
+25C +85C -40C
VCOS PLOs
Sensitivity Tuning Voltage, Vcc=
+25C +85C -40C
Output Power Tuning Voltage, Vcc=
OUTPUT POWER (dBm)
+25C +85C -40C
SENSITIVITY (MHz/VOLT)
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
Phase Noise Tuning Voltage
PHASE NOISE (dBc/Hz)
10kHz offset 100kHz offset
Typical Phase Noise Vtune=
PHASE NOISE (dBc/Hz)
+25C +85C -40C
-100 -120 -140 -160
-100 -120 TUNING VOLTAGE (VOLTS)
OFFSET FREQUENCY (Hz)
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC532LP4 532LP4E
v01.0508
MMIC BUFFER AMPLIFIER,
Absolute Maximum Ratings
Vtune Channel Temperature Continuous Pdiss 85°C) (derate 6.07 mW/°C above 85°C) Thermal Resistance (junction ground paddle) Storage Temperature Operating Temperature Sensitivity (HBM) +3.5 +15V °C/W +150 Class
Typical Supply Current
2.75 3.25 (mA)
Note: will operate over full voltage range shown above.
ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS
VCOS PLOs
Outline Drawing
NOTES: LEADFRAME MATERIAL: COPPER ALLOY DIMENSIONS INCHES [MILLIMETERS] LEAD SPACING TOLERANCE NON-CUMULATIVE. BURR LENGTH SHALL 0.15mm MAXIMUM. BURR HEIGHT SHALL 0.05mm MAXIMUM. PACKAGE WARP SHALL EXCEED 0.05mm. GROUND LEADS GROUND PADDLE MUST SOLDERED GROUND. REFER HITTITE APPLICATION SUGGESTED LAND PATTERN.
Package Information
Part Number HMC532LP4 HMC532LP4E Package Body Material Stress Injection Molded Plastic RoHS-compliant Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Rating MSL1 MSL1
Package Marking H532 XXXX H532 XXXX
peak reflow temperature peak reflow temperature 4-Digit number XXXX
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC532LP4 532LP4E
v01.0508
MMIC BUFFER AMPLIFIER,
Descriptions
Number Function Description Connection Interface Schematic
This must connected ground.
RFOUT
output coupled)
Supply Voltage Vcc=
VCOS PLOs
VTUNE
Control Voltage Input. Modulation port bandwidth dependent drive source impedance. "Determining Bandwidth Wideband Varactor Tuned VCO" application note.
Package bottom exposed metal paddle that must grounded.
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC532LP4 532LP4E
v01.0508
MMIC BUFFER AMPLIFIER,
Evaluation
VCOS PLOs
List Materials Evaluation 105706
Item Description Mount Connector Tantalum Capacitor 10,000 Capacitor, 0603 Pkg. HMC532LP4 HMC532LP4E 105667 Eval Board
Reference this number when ordering complete evaluation Circuit Board Material: Rogers 4350
circuit board used final application should circuit design techniques. Signal lines should have impedance while package ground leads exposed paddle should connected directly ground plane similar that shown. sufficient number holes should used connect bottom ground planes. evaluation circuit board shown available from Hittite upon request.
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC532LP4 532LP4E
v01.0508
MMIC BUFFER AMPLIFIER,
Notes:
VCOS PLOs
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
Other recent searches
TK11890AB1 - TK11890AB1 TK11890AB1 Datasheet
S30C150CE - S30C150CE S30C150CE Datasheet
PCI93LV - PCI93LV PCI93LV Datasheet
ICA90 - ICA90 ICA90 Datasheet
Win95 - Win95 Win95 Datasheet
2000 - 2000 2000 Datasheet
MCR03 - MCR03 MCR03 Datasheet
ICS843252I-04 - ICS843252I-04 ICS843252I-04 Datasheet
AE002M6-77 - AE002M6-77 AE002M6-77 Datasheet
2SC2073 - 2SC2073 2SC2073 Datasheet
Privacy Policy | Disclaimer
© 2013 Datasheets.org.uk