HMC386LP4
|
|
|
Top Searches for this datasheet
HMC386LP4 - HMC386LP4
HMC386LP4 386LP4E
v04.1209
MMIC BUFFER AMPLIFIER,
noise MMIC w/Buffer Amplifier for: Wireless Infrastructure Industrial Controls Test Equipment Military
Features
Pout: Phase Noise: -114 dBc/Hz @100 External Resonator Needed Single Supply: 35mA Lead 4x4mm Package:
Functional Diagram
General Description
HMC386LP4 HMC386LP4E GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC VCOs with integrated resonators, negative resistance devices, varactor diodes, buffer amplifiers. Covering GHz, VCO's phase noise performance excellent over temperature, shock, vibration process oscillator's monolithic structure. Power output typical from single supply 35mA. voltage controlled oscillator packaged cost leadless surface mount package.
VCOS
Electrical Specifi cations,
Parameter Frequency Range Power Output Phase Noise Offset, Vtune Output Tune Voltage (Vtune) Supply Current (Icc) (Vcc +3V) Tune Port Leakage Current Output Return Loss Harmonics Pulling (into 2.0:1 VSWR) Pushing Vtune Frequency Drift Rate Min. Typ. -114 Max. Units dBc/Hz MHz/V MHz/°C
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC386LP4 386LP4E
v04.1209
MMIC BUFFER AMPLIFIER,
Frequency Tuning Voltage, 25°C
Frequency Tuning Voltage,
OUTPUT FREQUENCY (GHz)
2.75V 3.00V 3.25V
OUTPUT FREQUENCY (GHz)
+25C +85C -40C
TUNING VOLTAGE
TUNING VOLTAGE
Sensitivity Tuning Voltage,
Output Power Tuning Voltage,
VCOS
SENSITIVITY (MHz/VOLT)
OUTPUT POWER (dBm)
+25C +85C -40C
+25C +85C -40C
TUNING VOLTAGE
TUNING VOLTAGE
Phase Noise Tuning Voltage
Typical Phase Noise Vtune=
PHASE NOISE (dBc/Hz)
PHASE NOISE (dBc/Hz)
-100 -105 -110 -115 -120 -125 10kHz offset 100kHz offset
+25C +85C -40C
-100
-125
-150
TUNING VOLTAGE
OFFSET FREQUENCY (Hz)
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC386LP4 386LP4E
v04.1209
MMIC BUFFER AMPLIFIER,
Absolute Maximum Ratings
Vtune Channel Temperature Thermal Resistance (RTH) (junction package base) Storage Temperature Operating Temperature +3.5V +11V °C/W +150
Typical Supply Current
2.75 3.25 (mA)
Note: will operate over full voltage range shown above.
ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS
Outline Drawing
VCOS
NOTES: LEADFRAME MATERIAL: COPPER ALLOY DIMENSIONS INCHES [MILLIMETERS] LEAD SPACING TOLERANCE NON-CUMULATIVE. BURR LENGTH SHALL 0.15mm MAXIMUM. BURR HEIGHT SHALL 0.05mm MAXIMUM. PACKAGE WARP SHALL EXCEED 0.05mm. GROUND LEADS GROUND PADDLE MUST SOLDERED GROUND. REFER HITTITE APPLICATION SUGGESTED LAND PATTERN.
Package Information
Part Number HMC386LP4 HMC386LP4E Package Body Material Stress Injection Molded Plastic RoHS-compliant Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Rating MSL1 MSL1
Package Marking H386 XXXX H386 XXXX
peak reflow temperature peak reflow temperature 4-Digit number XXXX
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC386LP4 386LP4E
v04.1209
MMIC BUFFER AMPLIFIER,
Descriptions
Number Function Description pins connected internally; however, data shown herein measured with these pins connected RF/DC ground externally. This must connected ground. Package bottom exposed metal paddle that must grounded. output coupled) Interface Schematic
RFOUT
Supply Voltage Vcc=
VTUNE
Control Voltage Input. Modulation port bandwidth dependent drive source impedance.
VCOS
Evaluation
List Materials Evaluation 105706
Item Description Mount Connector Tantalum Capacitor 10,000 Capacitor, 0603 Pkg. HMC386LP4 HMC386LP4E 105667 Eval Board
Reference this number when ordering complete evaluation Circuit Board Material: Rogers 4350 Arlon 25FR
circuit board used application should circuit design techniques. Signal lines should have impedance while package ground leads exposed paddle should connected directly ground plane similar that shown. sufficient number holes should used connect bottom ground planes. evaluation circuit board shown available from Hittite upon request.
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
Other recent searches
SLA70 - SLA70 SLA70 Datasheet
MG3A - MG3A MG3A Datasheet
LP0414 - LP0414 LP0414 Datasheet
GSM1111 - GSM1111 GSM1111 Datasheet
ENV1375-1 - ENV1375-1 ENV1375-1 Datasheet
2SK2704 - 2SK2704 2SK2704 Datasheet
2SC3694 - 2SC3694 2SC3694 Datasheet
Privacy Policy | Disclaimer
© 2013 Datasheets.org.uk