BTP-187XXCQ-XX-XX
|
|
|
Top Searches for this datasheet
BTP 10 - BTP 10
BTP-187XXCQ-XX-XX - BTP-187XXCQ-XX-XX
BriLux Light Source BTP-187XXCQ-XX-XX
[Note
Highest Lumen Watt
Long Operational Life More Energy Efficient Compatible Voltage Superior Protection
Smallest Footprint
Applications
Accent Lighting Automotive Exterior/Interior Light High Power Back Light Reading Light Marine/Miner's Lighting Portable Lighting
Tolerance: spec
Unit:
Optical Characteristics IF=350mA
PART NUMBER CHIP MATERIAL
Lens Color Water Clear Water Clear Water Clear Water Clear Water Clear Water Clear
Wavelength/CCT Range (nm/K)
Drive Voltage
Luminous VIEW ANGLE Flux @350mA(lm) 21/2 Typ. lm[2]
Min/Max 620~635 585~595 460~470 470~480 520~530 3000K 8000K
Typ. 2.60V 2.60V 3.60V 3.60V 3.60V 3.60V
(deg)
BTP-187NRCQ-XX-17 BTP-187YECQ-XX-17 BTP-187BLCQ-XX-08 BTP-187GBCQ-XX-10 BTP-187PGCQ-XX-15 BTP-187WHCQ-XX-30
Note:
Picture illustration purpose only.
AlInGaP AlInGaP AlInGaN AlInGaN AlInGaN AlInGaN
lm[2] 15lm
lm[2]
Please refer outline dimension actual package size.
response curve wavelength range, minimum luminous flux will vary over wavelength range example, luminous flux will vary from minimum 4.5lm typical 480nm this effect.
LECTRO Inc. 3600 boul. Matte suite Brossard J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
BriLux Light Source BTP-187XXCQ-XX-XX
Absolute Maximum Ratings
Parameter Red/Yellow White/Blue
Forward Current (mA)[1] Peak Pulsed Forward Current (mA) Average Forward Current (mA) Reverse Voltage Junction Temperature (°C) Thermal Resistance without heatsink (°C/W) Storage Temperature (°C) Operating Temperature (°C)
Application Notes: Proper forward current must observed maintain junction temperature below maximum rating Although products listed class protection (+/- mode), care must fully taken when handling products Specification subjected change improvements without notice.
LECTRO Inc. 3600 boul. Matte suite Brossard J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
BriLux Light Source BTP-187XXCQ-XX-XX
Typical Electro-Optical Characteristics Curves
LECTRO Inc. 3600 boul. Matte suite Brossard J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
BriLux Light Source BTP-187XXCQ-XX-XX
Recommended Soldering Pattern
Important Notes: information contained herein presented only Guide application products. Brilliance Technologies assumes responsibility infringement intellectual property other rights third parties which result from use. Brilliance Technologies continually improves quality products. Nevertheless, semiconductor devices general malfunction fail their inherent electrical sensitivity vulnerability physical stress. responsible customer, when using Brilliance Technologies products, comply with standard safety making safe design entire system, avoid situations which malfunction failure such Brilliance Technologies products cause loss human life, bodily injury damage property. Brilliance Technologies products listed this data sheet intended usage general electronics and/or non-commercial industrial lighting products. These products neither intended warranted usage equipment that requires extraordinarily high quality and/or reliability malfunction failure which cause loss human life bodily injury. developing your design, please ensure that Brilliance Technologies products used within specified operating ranges forth most recent Brilliance Technologies data sheets.
BT-Rev. 1.0B20040917 Specifications subject change improvement without notice. Copyright 2003 Brilliance Technologies Co., Ltd. rights reserved.
LECTRO Inc. 3600 boul. Matte suite Brossard J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
Other recent searches
SSN0610A - SSN0610A SSN0610A Datasheet
LP9435LT1G - LP9435LT1G LP9435LT1G Datasheet
KA1H0380R - KA1H0380R KA1H0380R Datasheet
FDW254P - FDW254P FDW254P Datasheet
BD235 - BD235 BD235 Datasheet
BD236 - BD236 BD236 Datasheet
BD237 - BD237 BD237 Datasheet
BD238 - BD238 BD238 Datasheet
Privacy Policy | Disclaimer
© 2013 Datasheets.org.uk